Pneumatic Lift Homogenizer for Sale

When the equipment is running, the rotor drives the blade to rotate at a high speed, generating a strong centrifugal force field, and forming a negative pressure zone in the center of the rotor, which inhales the material liquid. Under the action of centrifugal force, the material spreads from the center to the four sides, and is subjected to the stirring and shearing action of the blades during the diffusion process. The material is subjected to further shearing action in the narrow gap between the end face of the blade and the inner side of the stator tooth ring, and then enters the narrow gap between the rotating tooth and the fixed tooth of the inner ring, and is affected by mechanical force and hydrodynamics effect, resulting in shearing, friction and impact, so that dispersed phase particles or droplets are broken. As the linear speed of the tooth is gradually increased from the inner ring to the outer ring, the crushing environment of the material is continuously improved, and the purpose of homogenizing emulsification is finally achieved. ‌

As long as client can assemble by himself, can purchase a compete part. This is indeed saves cost. But it is better to buy a set if client are not professional for installation.

Yes, the homogenizer head is dismountable. If there is any problem of the working head, just disassemble it and check. Videos is provided.

The shear mixer mainly through the high-speed relative rotation of the rotor and the stator to produce a strong shear force to achieve the refinement and homogenization of the material. ‌

Generally the paddle can not be replaceable, unless the new paddle to be changed are the same size with the old one.